Method Wheel Cleaner: Keep Wheels Looking New

Quick answer

Use Method Wheel Cleaner to safely remove grime and preserve your wheel's finish. Follow a simple rinse, spray, and wipe routine for best results.

How to clean your off-road wheels with Method Wheel Cleaner

1. 1. Rinse loose dirt: Spray the wheel with water to remove loose dust and mud. This prevents scratching the finish when you apply the cleaner. Common mistake: skipping the rinse can grind grit into the surface.
2. 2. Apply Method Wheel Cleaner: Spray the cleaner generously onto the wheel surface. Cover all areas, especially behind spokes and around beadlock rings where grime hides. Checkpoint: avoid letting the cleaner dry on the wheel—work in the shade or on a cool wheel.
3. 3. Agitate with a soft brush or cloth: Use a soft-bristle brush or microfiber cloth to loosen stubborn grime. Focus on crevices and the rim edge where dirt packs in. Common mistake: using a stiff brush can scratch clear coats or anodized finishes.
4. 4. Rinse thoroughly: Rinse the wheel with clean water until all cleaner and loosened dirt are gone. Angle the spray to flush debris from tight spots. Checkpoint: leftover cleaner can attract more dirt, so rinse until water runs clear.
5. 5. Dry with a clean cloth: Wipe the wheel dry with a lint-free microfiber towel. Drying prevents water spots and lets you spot any missed grime. Common mistake: air-drying can leave mineral spots; manual drying gives a streak-free finish.

Product facts

• Method Wheel Cleaner: Method Wheel Cleaner is a pH neutral, eco-friendly formula that cleans any Method Wheel finish without leaving stains or residue. You can use it confidently on all Method finishes without worrying about damage or needing to rinse repeatedly.