How to Clean and Protect UTV Beadlock Rings

Quick Answer

To clean and protect UTV beadlock rings, use a mild soap and water wash, a soft brush for the ring crevices, and a dedicated wheel protectant or wax after drying. Avoid harsh chemicals that can damage the finish.

Step-by-Step Cleaning and Protection Process

1. Rinse the wheels: Use a hose or pressure washer on a low setting to remove loose mud and dirt from the beadlock rings and wheel face. Avoid aiming directly at the valve stem or ring bolts. A quick rinse prevents abrasive dirt from scratching the finish when you start washing.
2. Apply pH-neutral soap: Mix a pH-neutral wheel cleaner or mild soap with water. Use a soft sponge or microfiber mitt to wash the ring and wheel. Work in sections to avoid letting the soap dry on the surface. Dried soap can leave spots, so rinse each section promptly.
3. Scrub the ring crevices: Use a soft-bristled brush (like a detailing brush) to clean the grooves and edges of the beadlock ring. Pay extra attention to areas where grime builds up. Do not use metal brushes or abrasive pads. A soft brush prevents scratching the ring's finish while still lifting stubborn dirt.
4. Rinse thoroughly: Rinse the entire wheel with clean water to remove all soap residue. Ensure no cleaner remains in the ring crevices or around the bolts. Leftover soap can attract more dirt and cause film buildup.
5. Dry the wheels: Use a clean microfiber towel to dry the beadlock rings and wheel. Air drying can leave water spots, especially in hard water areas. Drying immediately prevents mineral deposits from etching the finish.
6. Apply a protectant or wax: Once dry, apply a wheel-safe wax or sealant to the beadlock ring and wheel surface. Follow the product instructions and buff with a clean microfiber cloth. This adds a protective layer that repels dirt and makes future cleaning easier. A protectant also helps shield the finish from brake dust and UV exposure.

Beadlock Ring Options from Method Race Wheels

• 401 | UTV Beadlock | Titanium - Matte Black Ring: The 401 Beadlock UTV wheel features a push-through center cap with an embossed Method Race Wheels logo, and the Schrader valve is placed between spokes for protection. This design keeps the valve safe during cleaning, so you can focus on the ring without worrying about damaging the valve stem.

  

• 415 - Markdown | UTV Beadlock | Double Black®: The 415 Double Black® UTV Beadlock has an aggressive style and is engineered for strength and performance on any terrain. The durable finish on this wheel responds well to regular gentle cleaning, helping it maintain its fresh look after tough rides.