Method 704 Titanium Bead Grip: Fitment and Care FAQ
By Method Race Wheels | Off-Road Wheels | Published: 2026-11-03
Category: Tips & Care
Straight answers on Method 704 Titanium fitment, Bead Grip tire mounting, and keeping the titanium finish clean through trail season.
Quick answer
The Method 704 Titanium is a 12-spoke Bead Grip wheel built for off-road use, and it lets you air down below pressures that used to demand beadlocks. Match the size, bolt pattern, and offset to your vehicle before ordering, then treat the titanium finish as a cosmetic layer that needs gentle, regular cleaning.
Why fitment starts with bolt pattern and offset, not looks
The 704 is offered in multiple sizes, bolt patterns, and offset/spacing options, so the same-looking wheel can sit very differently on two trucks. Bolt pattern has to match your hub exactly; offset decides whether the tire clears suspension and fenders or rubs at full lock. Because the catalog lists these as separate option types, confirm all three values against your vehicle before checkout rather than choosing by finish alone.
What Bead Grip changes about airing down
Bead Grip Technology is designed to hold the tire bead at lower pressures than a conventional wheel, which is why Method positions it as a step before beadlocks. That does not make it a beadlock: you still need to stay within the pressure range your tire and wheel combination can safely support, and you should recheck bead seating after any hard trail day. If you routinely run extremely low pressures, a true beadlock may still be the more appropriate choice.
Titanium finish care: clean often, scrub gently
Titanium is a finish, not a protective armor plate. Brake dust, mud, and road salt sit on the surface and dull it over time, so rinse the wheels after muddy or salty drives and use a pH-neutral wheel cleaner with a soft brush. Skip harsh acid-based cleaners and abrasive pads, which can scratch or stain the coating. A coat of non-abrasive sealant makes the next wash easier without changing the look.
Method 704 Titanium questions, answered
- How do I confirm Method 704 fitment?
- Check your vehicle's bolt pattern, then choose the size and offset/spacing that clear your suspension and fenders. The 704 catalog lists size, bolt pattern, and offset/spacing as separate options, so verify all three before ordering. Write your three target specs down before you shop.
- Can I air down with Bead Grip?
- Yes. Bead Grip Technology is designed to allow tire deflation to pressures that previously required beadlock wheels to prevent debeading. Stay within the safe pressure range for your tire and wheel package, and inspect bead seating after low-pressure trail use.
- How should I clean the titanium finish?
- Rinse off mud and salt promptly, wash with a pH-neutral wheel cleaner and a soft brush, and dry with a microfiber towel. Avoid acid-based cleaners and abrasive pads that can scratch or stain the finish.
- Will the titanium finish last through winter?
- Regular washing is the main defense. Road salt and brake dust left sitting on the wheel are the usual cause of dulling and staining, so rinse more often in winter and reapply a non-abrasive sealant after cleaning.
- What should I check after mounting tires?
- Confirm the bead is seated evenly around the rim, recheck lug torque after the first drive, and inspect the bead area after any low-pressure off-road session. If a bead looks unseated, stop and have it reseated before driving at speed. Re-torque lugs after the first drive on new wheels.
Product facts
- 704 | Titanium: The 704 Bead Grip wheel uses a timeless 12-spoke design and is offered in multiple sizes, bolt patterns, and offset/spacing options. You can tailor the fit to your vehicle, but you must confirm each option rather than assuming one spec fits all.
704 | Titanium
