Fitment comes before finish
The Bronze Digicam push-through center cap is a cosmetic upgrade, but it only works if it physically fits your wheel. Method states that cap style and wheel bolt pattern determine fitment and part number. That means you cannot pick a cap by color alone. Start by confirming your wheel accepts a push-through style cap, then match the bolt pattern to the correct variant.
If you are replacing an existing push-through cap, the Bronze Digicam push-through cap is designed to sit more flush than a snap-in alternative. That flush look is a styling benefit, not a universal fit guarantee. The cap is intended for wheels that already accept a push-through style cap, so check your current setup before ordering.
What the catalog confirms about this cap
- Center Cap | Digicam Push-Through | Bronze: Offered in both snap-in and push-through styles, these caps fit numerous styles of Method wheels. The mounting style must match your wheel; a snap-in cap will not substitute for a push-through cap.

Center Cap | Digicam Push-Through | Bronze - Center Cap | Digicam Push-Through | Bronze: Cap style and wheel bolt pattern determine fitment and part number. Two wheels with the same finish can need different caps, so bolt pattern is a required check.
- Center Cap | Digicam Push-Through | Bronze: If replacing a push through cap, the Bronze Digicam push through cap will offer more of a flush look. This is the visual outcome you can expect when swapping an existing push-through cap.
Choose the variant that matches your bolt pattern
The supplied catalog lists two size variants for this cap. Both are push-through style in the Bronze Digicam finish, but they serve different bolt patterns. The part number suffix helps you distinguish them at checkout.
- 5x5 | 6x135 | Push Through | CP-DC93P-BZ: This variant is intended for wheels with a 5x5 or 6x135 bolt pattern that accept a push-through cap. Confirm your wheel's bolt pattern before selecting this part number.
- 5x5.5 | 6x5.5 | Push Through | CP-DC108P-BZ: This variant covers the 5x5.5 or 6x5.5 bolt pattern group for push-through applications. It is a separate part number, so do not assume it interchanges with the 5x5/6x135 cap.
A simple care routine for the Bronze Digicam finish
The supplied product record does not include manufacturer cleaning instructions, so the steps below are general finish-upkeep guidance rather than a Method procedure. The goal is to remove road film without abrasion that could dull the digicam pattern.
Always start with a cool wheel. Wash one cap at a time so you can inspect the finish as you go, and stop if you see any change in appearance that concerns you.
- 1. Rinse loose dirt first: Use a gentle stream of water to flush away grit. Rinsing before wiping reduces the chance of dragging abrasive particles across the bronze finish.
- 2. Use a mild soap solution: Apply a pH-neutral car wash soap with a soft microfiber cloth. Avoid abrasive pads, harsh wheel acids, or strong degreasers, which are not confirmed as safe for this finish.
- 3. Wipe gently around the pattern: Follow the contours of the digicam design rather than scrubbing across it. Light pressure is enough for normal road dust.
- 4. Rinse and dry completely: Flush away soap residue and dry the cap with a clean microfiber towel. Leaving water spots or soap film behind can make the finish look uneven.
- 5. Inspect after each wash: Check for chips, fading, or loosening. If the cap no longer sits flush or shows damage, replacement may be more appropriate than continued cleaning.
What to avoid between washes
Because the supplied record does not list care instructions, treat any aggressive chemical or abrasive method as unverified. Automatic car washes with stiff brushes, acidic wheel cleaners, and scouring pads are best avoided on a decorative finish. If you use a pressure washer, keep the nozzle at a reasonable distance and avoid directing a concentrated stream at the cap edge, which could work under the finish or dislodge the cap.
The Bronze Digicam cap is a visual accessory, not a protective component. If you frequently drive on gravel or in winter road salt, rinse the caps more often rather than relying on a single deep clean.
When to replace rather than clean
Cleaning restores appearance; it cannot repair physical damage. If the bronze finish is chipped, the digicam pattern is worn through, or the cap no longer seats flush, a replacement is the practical choice. The catalog price for this cap is USD 24.42, with a comparison price of USD 33.00, so replacement is a relatively low-cost way to refresh the look of your wheels.
Before ordering a replacement, recheck the two fitment details: push-through style and bolt pattern. The same finish is available in multiple part numbers, and ordering by appearance alone can result in the wrong cap.
Catalog details for replacement planning
- Center Cap | Digicam Push-Through | Bronze: Change the look of your wheels with our Bronze Digicam design Center Cap. The cap is a cosmetic change, so finish condition is the main reason to replace it.
- Center Cap | Digicam Push-Through | Bronze: This Push-Through cap is designed for wheels that already accept a push-through style cap. If your wheel uses a snap-in cap, this push-through model is not the correct replacement.


